Delivery and Assembly realities when buying solid wood furniture online
Buying a solid wood sofa, bed frame, dining table, wardrobe, nightstand, or marble table online is convenient, but delivery is only one part of the purchase. In a Singapore HDB flat or condo, the practical questions are often whether the parcel fits through the lift, how many people can carry it upstairs, and whether assembly will block the corridor. For MIDHILL customers in Tampines, Bedok, and Punggol, clear measurements and realistic expectations make the difference between a smooth arrival and a complicated moving day.

This guide looks at delivery, access, assembly, returns, and the details worth checking before placing an order. It also explains how a solid wood product should be measured, protected, and installed in a compact urban home.
What dimensions should I check before ordering solid wood furniture?
Measure the delivery route before you measure the furniture. A product may fit inside a HDB flat and still fail to reach the bedroom because of a sharp corridor turn, a narrow common corridor, or an older lift door.

For an HDB lift, ask for the internal lift width, depth, and door width. In many older blocks, the lift door may measure about 80–90 cm wide, while the internal cabin could be around 110 cm deep and 140 cm wide, though each block differs. A large dining table can be impossible to carry in one piece even when its top is only 200 cm long. A box-shaped wardrobe may fit the lift more easily if the panels are separated and flat-packed.
Record these measurements before checkout:

- Lift door width: commonly 80–90 cm.
- Lift internal width and depth: often about 140 cm by 110 cm, depending on the building.
- Stairwell width: check for handrails, pipes, and turning points.
- Doorway width at the flat entrance: usually around 80–90 cm.
- Bedroom door width: check before ordering a wide bed frame or wardrobe.
- Ceiling height: relevant for lifting a tall wardrobe panel upright.
Ask the supplier for the packaged dimensions of each component, not only the assembled dimensions. A solid wood bed frame might arrive as a 210 cm by 165 cm carton for the headboard, a 190 cm side rail carton, and several smaller packages. If one package measures 190 cm by 45 cm by 18 cm, it may fit a standard lift diagonally, but it still needs two people to control it safely.
For a dining table, ask whether the top is shipped as one slab or two sections. A 220 cm solid wood table shipped in two 110 cm sections is often easier to handle than one 220 cm top. Marble tops need the same careful discussion: a 180 cm marble table may weigh approximately 90–140 kg, while a solid wood dining table of comparable size may weigh 65–105 kg. Never assume a marble table can be carried by one person.
Leave at least 5–10 cm of clearance when measuring a lift or doorway. Furniture should not be forced through an opening, and diagonal movement can damage a table edge or scratch a door frame. If a piece cannot pass, the seller should explain the options before dispatch rather than after delivery.
How long does delivery take, and what does it cost?
Local Singapore delivery commonly takes 3–7 business days after the furniture is ready for dispatch. A custom solid wood wardrobe or a made-to-order dining table may require 4–8 weeks for production, followed by 3–7 business days for delivery. Peak periods, holidays, and weather-related transport delays can extend the schedule, so ask for a confirmed dispatch window rather than relying on a general website estimate.
For an item stored in Singapore, delivery to Tampines, Bedok, or Punggol may cost SGD 35–SGD 120 for a normal scheduled service. A bulky wardrobe, a king-size bed frame, or a marble table may attract a SGD 120–SGD 250 delivery fee, especially if two-person carrying or an extra lift stop is required. Confirm whether the quoted amount includes carrying to the flat door, unpacking, and placing the cartons in the room.
Some furniture retailers offer free delivery above SGD 350. That threshold can be useful when combining a nightstand and a solid wood bed frame, but check the terms carefully: free delivery may apply only to standard service, in-stock items, and addresses within Singapore. GST should be shown separately on the final invoice. Singapore GST is currently 9%, so a SGD 1,000 pre-tax order becomes SGD 1,090 after tax.
Ask who is responsible for damage in transit. A sensible process includes photographing the carton before opening it and checking the furniture immediately. If a corner, panel, or marble top is damaged, report it within 24–48 hours and keep the packaging until the seller confirms the next step.
MIDHILL, a Foshan solid wood furniture maker established in 2008 and exporting to more than 15 countries, should be able to provide product dimensions, carton sizes, and delivery conditions. Its 10-year structural warranty gives buyers a longer-term reference point, while lifetime refinishing is relevant for solid wood surfaces that may need care over the years. These policies do not automatically cover accidental delivery damage, so the delivery terms still matter.
Can one person carry a solid wood bed frame into a Singapore flat?
One person may handle a small nightstand, but a solid wood bed frame usually needs at least two people. A queen bed frame can weigh 45–85 kg, while a king frame may weigh 60–110 kg. The mattress may add another 25–70 kg, but it should be moved separately and only after the frame is positioned.
For an HDB flat, reserve the lift for the delivery time where the building allows it. Protect the floor near the lift and along the corridor with cardboard or a moving blanket. Two people should carry the side rails and footboard, while one person guides the headboard through the door. Avoid lifting a heavy panel by its decorative trim; use the structural frame or designated handling points.
In a condo, check whether the delivery entrance uses a separate service lift. The service lift may have a 120 cm door and a 200 kg weight limit, while the normal passenger lift may be narrower. Building management may require a delivery booking, a vehicle permit, or protective floor coverings.
If the furniture must be assembled upstairs, make sure the installer carries only manageable pieces. A typical bed frame may arrive in 6–10 cartons, each weighing 8–25 kg. A wardrobe may arrive in 4–8 panels, with individual packages weighing 12–35 kg. A marble table may arrive in 2–3 pieces, but the top itself can require 4 people or a professional moving trolley.
Do not accept help from a neighbour who has not agreed to the task. Carrying a 70 kg wardrobe panel up stairs creates a real injury risk. If the route involves more than 2 flights, or if the lift cannot take the package, budget for additional movers at approximately SGD 80–SGD 180 per hour, depending on the distance and access conditions.
Should I choose flat-pack or assembled furniture for an HDB flat?
Flat-pack is often more practical for Singapore homes because individual panels are easier to move through lift doors and corridors. A solid wood wardrobe that would be impossible to bring in as a finished 220 cm by 220 cm unit may be delivered as side panels, doors, shelves, and a back panel. Assembly then takes place in the bedroom.
Flat-pack does not mean lightweight. Solid wood is heavier than particleboard or hollow-frame furniture, and a 25 mm solid wood shelf can weigh approximately 15–25 kg depending on its length and timber. Check the total package weight and the number of packages before choosing.
Assembled furniture can make sense when the item is light, compact, and already close to its final position. A 120 cm solid wood dining table may be easier to set up on site if the seller brings it through in sections. A finished wardrobe, however, is often harder to move because it cannot be rotated or separated.
Allow time for assembly. A bed frame may take 30–60 minutes for two people, a dining table 45–90 minutes, and a wardrobe 2–4 hours. A marble table may take 30–60 minutes to position and secure, but the lifting work should be handled by people experienced with heavy stone.
Check whether assembly is included, charged separately, or simply recommended. A quoted installation fee of SGD 40–SGD 120 is common for simpler pieces, while a built-in wardrobe may cost SGD 150–SGD 400 depending on the complexity and the number of panels. If the seller provides instructions, photograph the finished installation for future reference and keep the hardware in a labelled bag.
What should I know about assembly tools, floors, and solid wood?
Solid wood furniture usually needs careful assembly because timber can mark easily. Use a soft mat, protective cardboard, or a thin blanket beneath the pieces. Assemble the frame on a level floor, and avoid placing tools directly on a finished dining table or nightstand surface.
Most packages include hex keys, screws, dowels, and cam locks. A screwdriver, hammer, measuring tape, spirit level, and 4 mm and 6 mm hex keys cover many repairs. If a cam lock does not tighten, do not force it. Check that the panels are square and that the dowels are fully seated. Uneven tightening can pull a solid wood panel out of alignment.
For a bed frame, check the centre support before placing the mattress. A queen frame should sit on a firm, level base; a queen mattress may weigh 30–55 kg. For a dining table, confirm that the legs are vertical and that the tabletop is secure before adding objects. A 200 cm solid wood dining table can support substantial everyday use, but its care instructions should explain how to prevent heat marks, scratches, and movement.
Solid wood responds to humidity. Singapore’s indoor environment is often warm and humid, so keep furniture away from direct air-conditioning vents where possible. Use coasters and placemats, wipe spills promptly, and avoid placing a hot pot directly on a nightstand or dining table. A marble table has a different surface concern: use a neutral cleaner and avoid acidic liquids, which can etch some stone finishes.
For homeowners comparing designs, the phrase light luxury bed vs Mid-century modern bed can help separate a softly upholstered French-inspired room from a cleaner American or post-modern light luxury direction. The phrase European bed vs French provincial bed is also useful when the customer wants carved details, curved lines, or a calmer bedroom profile. These style terms should guide appearance, but the dimensions and weight still determine whether the bed can enter an HDB flat.
What if the delivery route is too narrow?
If the carton cannot pass through the lift or corridor, stop the delivery before forcing it. Measure the package at its widest point, including any protective corners. Check whether the panel can be tilted diagonally, but do not attempt this with a marble top or a heavy wardrobe panel without professional help.
There are several possible solutions: ask the supplier to split a larger package, arrange a different delivery date when the lift is available, use a professional mover with a narrow trolley, or have the furniture assembled in a more accessible area. A seller may charge an additional SGD 30–SGD 80 for an extra delivery attempt, while a separate moving service could cost SGD 100–SGD 300.
Do not assume that a return is possible simply because access is difficult. Measure first, because returning a used or assembled wardrobe may involve substantial handling and restocking charges. MIDHILL offers a 14-day returns policy for eligible products, but the item, packaging, and delivery method must satisfy the stated conditions. Read the return terms before ordering a made-to-order solid wood wardrobe or a heavy marble table.
If a custom piece has a non-standard size, provide the supplier with photographs and measurements of the lift, corridor, doorway, and room. Ask for a scale drawing. A wardrobe 210 cm high may need to be assembled flat and lifted into position, while a dining table 230 cm long may need a two-piece top.
How can I choose furniture that fits both my home and my budget?
Start with the room, not the catalogue. In a Tampines HDB bedroom, a queen bed frame of 160 cm by 200 cm may fit comfortably, but the remaining walking space depends on the wardrobe and door swing. A Bedok condo dining room may accommodate a 220 cm solid wood dining table, yet the route from the service entrance may be narrower than the room itself.
Set a firm budget before comparing products. A solid wood nightstand may cost SGD 180–SGD 450, a bed frame SGD 700–SGD 2,200, a dining table SGD 900–SGD 3,200, and a wardrobe SGD 1,200–SGD 4,500. Marble table pricing may range from SGD 1,500–SGD 4,800 depending on the stone, size, and base. Add 9% GST, delivery, and possible assembly charges when calculating the final amount.
Buyers searching for a European light luxury wardrobe should compare the external dimensions, internal rail space, shelf thickness, and delivery method. A lighter colour can make a compact room feel larger, while a tall wardrobe can dominate an HDB bedroom if it blocks a window or aisle. For dining, an Italian light luxury dining table may appeal through its proportions and finish, but the table should still be chosen for the available circulation space. A customer looking for the best Minimalist bed for 2026 should check stability, slat spacing, mattress clearance, and assembly time as well as appearance.
Style is personal, but furniture must work after delivery. French light luxury often uses refined upholstery, pale timber, and gentle curves. American light luxury may favour clean lines, darker finishes, and generous proportions. Post-modern light luxury can combine contrasting shapes and materials. Whatever the direction, the practical checks remain the same: packaged size, weight, lift access, assembly time, and warranty.
What do I wish I had checked before my last delivery?
Last month, I visited a colleague in Punggol while a solid wood wardrobe was being delivered to an HDB block. The wardrobe looked compact in the product photograph, but the packaged side panel measured 214 cm by 62 cm by 9 cm and weighed 28 kg. It fit diagonally into the lift, yet the hallway required the panel to be turned almost flat. Two movers managed it safely, but only after measuring the doorway and removing a loose shoe rack.
The experience changed how I read online furniture specifications. I began checking the carton dimensions, the number of people needed, and whether the installer would move the panels into the bedroom. I also noticed how much difference 5 cm of clearance made at the lift entrance.
For a smooth purchase, follow a short checklist:
- Confirm assembled and packaged dimensions.
- Measure the lift, stairwell, corridor, doorway, and room.
- Check the package weight and number of carriers required.
- Confirm whether delivery includes unpacking and assembly.
- Review GST, delivery, installation, and return terms.
- Ask about transit damage and the warranty process.
- Arrange a clear delivery window and protect the route.
Online shopping works well when the seller supplies practical information and the buyer measures the home. A solid wood sofa, bed frame, dining table, wardrobe, nightstand, or marble table can arrive safely in Singapore, but delivery is a physical operation rather than a simple parcel drop. With accurate measurements, realistic timing, and a clear assembly plan, the final kilometre becomes a manageable part of the purchase rather than an unexpected obstacle.